Chinese translation for "crank arm"

曲臂
曲柄臂

Related Translations:

cranking:  手摇起动摇动转动曲柄

crank auger:  曲柄钻

cranking claw:  起动爪

cross crank:  横向曲轴前后向曲轴

crank effort:  曲柄回转力矩

straight crank:  直线曲柄

inside crank:  内曲柄

cranked wrench:  曲柄扳手曲柄板手

crank starter:  启动曲柄曲柄启动器

overhang crank:  外伸曲柄

Example Sentences:

	1.	Cams are fastened on the fixture by screws , and the inside transmission system rotates cams to puch crank arms to change the position of slides 凸轮固定在旋轮轴上，可以螺丝调整前后，并用以推动滑座之运动。
	2.	Crank arm is the one of the important components of air compressor and bears the drastic dynamic load during its working prcess . and then the dynamic load is transfered to the bolts and the nuts connecting the crank arm body and the top 连杆是空压机重要构件之一，其在工作过程中承受着急剧变化的动载荷，这一动载荷又传递到连杆体和连杆盖的两个连接螺栓及螺母上。
	3.	( 2 ) the crack compares with one depth with the first steps and the second steps natural frequency vibration , crack position near crank arm and main shaft transition round natural frequency little place under crankshaft ; with the third steps and the fourth steps natural frequency vibration , the smaller close to the second crank arm of crankshaft and round place natural frequency of the main shaft transition the position is ( 2 )裂纹同一深度比以第1阶和第2阶固有频率振动，裂纹位置越靠近曲轴中间曲柄臂与主轴过渡圆处固有频率越小；以第3阶和第4阶固有频率振动，位置越靠近曲轴第二个曲柄臂与主轴过渡圆处固有频率越小。

Similar Words：

"crank and rocker mechanism" Chinese translation, "crank angle" Chinese translation, "crank angle between extreme positions" Chinese translation, "crank angle selecting unit" Chinese translation, "crank angle signal sender" Chinese translation, "crank arm (or web)" Chinese translation, "crank arm, planet carrier" Chinese translation, "crank arm; crank radius; crank web" Chinese translation, "crank arrangement" Chinese translation, "crank assembly - fatigue test" Chinese translation